Bird cage – paper craft

Hello!

Santoshi had to recite a poem at school and marks will be awarded based on many criteria, one of which is props.

The poem was about a sparrow and a boy offers to make a silver cage for the sparrow. But the sparrow likes to fly free.

We (read I) decided to make 2 props – a bird cage out of paper and a drawing of a sparrow flying in the blue sky. As she is a talented artist, drawing became her responsibility.

I offered to make the cage using paper abs involve Santoshi in the making of it.

As usual, I turned to Google for ideas. Which led me to a couple of YouTube videos. I came up with my own version of a bird cage, keeping in mind the cradt items in my stash, time involved and more importantly, my ability to put the ideas into action.

These were the items used:

  1. Empty spool of cellophane tape
  2. Chart paper or card stock – to provide rigidity – any colour will do. I used black (left over after making the Halloween cat)
  3. Silver paper since the cage had to a soft cage for the poem.
  4. A length of string – used some yarn for hanging the swing inside the cage
  5. A piece of thicker card stock (used a packaging of Panasonic battery) for swing. Used this since the chart was not very thick.
  6. Glue
  7. A pair of scissors
  8. Ruler and pencil
  9. Thick, long needle to poke holes for the swing
  10. Cello tape

The spool is going to be the base. So, cover the entire spool in silver paper. The silver paper was very thin. So, had to cover the top and bottom of the spool with black chart before using the silver paper.

Using a pencil, trace the shape of the spool on the black chart (remember to trace on the outside rim. If you use the inside of the spool the trace, the circles will be smaller than the spool).

Repeat on the silver paper.

Cut to shape.

Add glue to the rim.

Align and stick the black chart first. Let dry.

Add glue to the black chart.

Align and stick the silver paper.

Now, let dry and repeat on the other side of the spool.

While the spool dries, let’s make a swing. I used a small strip from the battery package. Cover it with silver paper and let dry.

Now, it is time to make the rest of the cage.

Using a ruler and pencil, draw lines on the black chart to cut into strips (about 1 cm wide).

Cut them into individual strips.

Just so that the strips are silver on both sides, take each individual strip, paste one side on the wrong side of the silver paper.

Add glue to the side of the strip facing you, fold over and cut to shape. Repeat for each strip.

I made 6 strips (covered in silver paper). Four of these will be stuck to the side of the spool as the vertical bars of the cage. The remaining two will be bent to a circular shape.

Now, paste one end of strip to the side of spool and the other end of the same strip to the diametrically opposite side of the spool.

Add the bent strip about 3 inches above the base of the cage – this bent strip should be pasted to the inside of the bars. This will maintain the circular shape further up.

Add one more strip and using a piece of string or yarn, hang the swing from the top of the cage.

Add two more vertical bars to the cage. Align the other bent strip over the earlier one but this time, add it to the outside of the bars.

Cover the side of the base using silver paper. The spool is rigid enough that I didn’t have to use black chart.

The cage is ready!

Thanks for reading! Hope you like this post. If you have any feedback, please use the comments section! I’d love to hear from you!

Just to compensate for the bad quality pics, here is a picture of the sparrow drawn by Santoshi. 😀