0

DIY Iron Board

Hello!

When I was mindlessly going through Pinterest, this pin popped up. I thought to myself that my iron board could use a new cover. But then, I had stacked it somewhere high up which was not readily accessible and I found the iron board with its collapsible stand too bulky to use (the real reason is my laziness).

But, this pin by Ashley was totally awesome!! A table-top iron board removes the bulk, makes it easier to store in the wardrobe and can be brought to the table as and when I needed. Wow!

I had salvaged a piece of plywood a few months back which could serve as the base. A lot of scrap fabrics in the box could easily be the batting. The missing ingredients were hot glue gun and a big stapler. That will not stop me, after all there are always workarounds and alternatives. I took the basic idea from Ashley’s tutorial and improvised to suit what I had.

Things used:

  • Thin plywood board
  • Quick-dry sheet (size: small) [to provide a little cushion]
  • Scrap fabrics
  • Cotton twine
  • Needle
  • Glue

Untitled

How I did it:

Step 1: Lay the fabrics flat one on top of the other, leaving out the outermost layer. My faded kameez was my outermost layer, so I kept it aside. The cotton dupatta was at the bottom, followed by the black fabric, then the pink fabric and the quick-dry sheet on top.

Step 2: Place the board on top of the sandwich and cut the fabrics with a seam allowance of about 1 inch on each side.

Step 3: Place the board on the outermost layer and cut it with a larger seam allowance. As it was a kameez, I did not get an even seam allowance on all sides.

Step 4: Stack the layers up with the outermost layer at the bottom.

IMG_20170411_174502

Step 5: Cut the corners (triangles) so that they are not very bulky while folding.

IMG_20170411_175858

Step 6: Apply glue to the layer which will be facing the board. I applied glue on the quick-dry sheet which will be sitting on the board.

IMG_20170411_180035~2

Step 7: Place the board on top of the sheet aligning with the corners and let it dry. I used my laptop and a few books (they belong to my husband; old books bought long back before eReaders were available in India) and waited for about 20 minutes.

IMG_20170411_180331~2

Step 8: Fold the fabric over and sew the corners together. Once all four corners are done, sew the ends together.

IMG_20170411_184329~2

Looks gross, isn’t it? Thought so.

Step 9: Using a piece of fabric, cover these stitches on the board and hem it with the outermost layer.

IMG_20170411_185327~2

IMG_20170411_191227~2

Not so much of an eyesore, right?

Turn it over and you have a new, portable iron board – handmade by you!! Need we say more?

IMG_20170411_191309~2IMG_20170411_191332~2

I used the iron board to fold the seams of the red fabric at the back for hemming. Cool, right?

Thanks for reading my post! I would be very happy to know your comments!